Custom Build Form: 1310 Series, 2.5" Heavy tube, slip yoke trans to pinion yoke

Fill out form to build your driveshaft

First Name
Last Name

This form will help you gather the measurements necessary to build a driveshaft for your application.

IMPORTANT NOTES:

Always measure driveshaft length with vehicle suspension at ride height.
We measure everything in inches.
When measuring anything under 6 inches, use a 6-inch scale or calipers, avoid using a tape measure.

Measurement Guide:

NOTE: Maximum Overall Length for 2.5" Shaft is 45.0". WHY? Click HERE to find out.

Dimensions are measured in inches and can be entered as decimals (eg. 0.75 or 20.125)

Make selection from list below

Note: GM TH400 with threaded hole in output shaft is 'Fixed Yoke' transmission and requires a .550" counterbored slip yoke, only available in Sonnax 1350 Mega Series.

Slip Yoke choices are displayed in 3 categories:

Domestic applications: Slip yokes from Spicer, Neapco and PTI are included in the driveshaft price. (Includes Ford, GM, Dodge)

Foreign applications (add $40): Slip yokes from Spicer, Neapco and PTI for foreign applications (Includes Toyota, Nissan, Mitsubishi, . . .)

Sonnax Performance (add $80): Forged steel slip yokes are available for popular muscle cars.

Make selection for pinion yoke style and u joint series below

Contact

The final step to complete this form is Verify the information below:

LengthA

LengthB

SlipYoke

Domestic

The data collected for a custom: 1310 series, 2.5" HEAVY driveshaft with transmission slip yoke and a fixed yoke axle pinion.

(generic image represents style of driveshaft specified by this form)

The information is correct - Continue and Purchase

The information is not correct - Go Back

Custom Build Form 1-250H-sy

Fill out form to build your driveshaft

Required measurements and information

Enter dimensions in fields:

Select Slip Yoke

Determine pinion yoke style and u joint series